Skip to main content

Increase mobile Charger CORD length.

OMG!!  Mobile's battery down needs a charger.. then you connect your mobile to your charger.
what next??


You can't take your mobile away now.. you are limited to 1 meter.

So what is the solution??


Here is one simple trick you can use.


REQUIREMENT 
1. need a charger with USB.
2. one useless charger.
3. one old mouse not in use.



STEP 1:

Take old mouse and open it . Now remove the USB cable from mouse.

STEP 2:

Now you will see 5 wires coming out of that USB cable



Cut the end of the USB cable to remove ( 1x5 header connector female )
Like this: 


(Those who can't do all this, Check this awesome cord below )

Now take the useless charger . Cut the cable keeping it as long as possible .

You probably see two wires coming out of it one white and one black.


STEP 4:


Now its time to connect the wires

USB Cable from mouse:
RED wire is + ve
BLACK wire is - ve

Charger Cable:
WHITE wire is + ve
BLACK wire is - ve


you have to connect the positive  wire to the positive and negative to negative
i.e; connect RED with WHITE & BLACK with BLACK.


STEP 5: 

Tape the wires carefully keeping them apart .


Now you have this:
In Association with Amazon.in


ENJOY your extended charger Cable .. :)





Comments

  1. This comment has been removed by the author.

    ReplyDelete
  2. Play Merkur Safety Razors - Shootercasino
    Merkur safety razors, also 메리트카지노 called Merkur 메리트카지노 Futur, are chrome plated safety razors. These razors are 메리트카지노 styled after the popular Merkur safety razors.

    ReplyDelete

Post a Comment

Popular posts from this blog

Cain Problems!! "Unable to open Winpcap driver: The system cannot find the device specified."

Facing problem with Winpcap ? I used to use Cain long time ago on my Windows 7 PC.  It was working fine but yesterday I installed the cain again on same windows and found some errors in cain. When tried to start ARP and Sniffer a message came up " Unable to open Winpcap driver : The system  cannot  find the device specified." I thought may be I haven't restart my PC thats why this messsage is coming because during installation it said that Winpcap will work properly after reboot. So I rebooted my PC and again the same problem. This time I took a closer look into the message and i found the solution from the message itself. message clearly said that Unnable to open the driver. Here are the simple steps you can follow to fix this problem. Step 1: Goto configuration  Step 2: Select sniffer Step 3: Select the right driver.  (Usually its the driver which is showing the IP of the network which you wanna sniff.) Thats it. No need to restart again...

Your WhatsApp's First DP