Skip to main content

Increase mobile Charger CORD length.

OMG!!  Mobile's battery down needs a charger.. then you connect your mobile to your charger.
what next??


You can't take your mobile away now.. you are limited to 1 meter.

So what is the solution??


Here is one simple trick you can use.


REQUIREMENT 
1. need a charger with USB.
2. one useless charger.
3. one old mouse not in use.



STEP 1:

Take old mouse and open it . Now remove the USB cable from mouse.

STEP 2:

Now you will see 5 wires coming out of that USB cable



Cut the end of the USB cable to remove ( 1x5 header connector female )
Like this: 


(Those who can't do all this, Check this awesome cord below )

Now take the useless charger . Cut the cable keeping it as long as possible .

You probably see two wires coming out of it one white and one black.


STEP 4:


Now its time to connect the wires

USB Cable from mouse:
RED wire is + ve
BLACK wire is - ve

Charger Cable:
WHITE wire is + ve
BLACK wire is - ve


you have to connect the positive  wire to the positive and negative to negative
i.e; connect RED with WHITE & BLACK with BLACK.


STEP 5: 

Tape the wires carefully keeping them apart .


Now you have this:
In Association with Amazon.in


ENJOY your extended charger Cable .. :)





Comments

  1. This comment has been removed by the author.

    ReplyDelete
  2. Play Merkur Safety Razors - Shootercasino
    Merkur safety razors, also 메리트카지노 called Merkur 메리트카지노 Futur, are chrome plated safety razors. These razors are 메리트카지노 styled after the popular Merkur safety razors.

    ReplyDelete

Post a Comment

Popular posts from this blog

Cain Problems!! "Unable to open Winpcap driver: The system cannot find the device specified."

Facing problem with Winpcap ? I used to use Cain long time ago on my Windows 7 PC.  It was working fine but yesterday I installed the cain again on same windows and found some errors in cain. When tried to start ARP and Sniffer a message came up " Unable to open Winpcap driver : The system  cannot  find the device specified." I thought may be I haven't restart my PC thats why this messsage is coming because during installation it said that Winpcap will work properly after reboot. So I rebooted my PC and again the same problem. This time I took a closer look into the message and i found the solution from the message itself. message clearly said that Unnable to open the driver. Here are the simple steps you can follow to fix this problem. Step 1: Goto configuration  Step 2: Select sniffer Step 3: Select the right driver.  (Usually its the driver which is showing the IP of the network which you wanna sniff.) Thats it. No need to restart again...

Pangolin: An Endangered Species Got killed just because of Curiosity

Pangolin Why the first reaction of people to always kill any animal that looks Strange/Dangerous, even when they don't know anything about it? September 5th, 2017, India an endangered mammal got killed just because of its looks. Pangolin: Protected by both national and international legislation. Pangolin: Hanged for the display